To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.
SuperScrape Impressions Logo Mat
- Clean - Surface cleats effectively remove and trap dirt and sand below shoe level to prevent tracking
- Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
- Easy to Clean - Lightweight flexible design ensures easy handling and cleaning (shake off soil and hose off); can be commercially laundered
- Features 3/16" thick nitrile rubber with circular surface cleats
Recommended for use in commercial and industrial settings where branding or messaging is required/preferred along with the debris removal qualities of a scraper mat. Excellent for customization with a company logo, slogan, or safety and quality reminders.
2.5' x 3' (29" x 34")
3' x 4' (34" x 45.5")
3' x 5' (34" x 54.5")
3' x 10' (34" x 112")
4' x 6' (45" x 67.5")
4' x 8' (45" x 95")
6' x 6' (71.5" x 72")
6' x 8' (71.5" x 96")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
CONSTRUCTION
Material: Nitrile rubber
Logo/Image Material: Polymeric film
Thickness: 3/16 inch (0.1875")
STANDARDS & TESTING
- Passes DOC-FF1-70 for surface flammability
- Certified high-traction by the National Floor Safety Institute (NFSI)
- ASTM C1028-96 static coefficient of friction:
Dry 0.86
Wet 0.72
A digital print on polymeric film allows customers to customize the SuperScrape mat with logos, images, and messages. Please refer to this product's Price List for details on the one-time PMS color matching set-up fee. A maximum of 4 PMS colors may be matched per design.*
Minimum Text Height: 1/2" (includes lowercase text)
Minimum Line Thickness: 1/16"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
White is prone to discolor and cannot be used as the background or any part of the imprint area. The product's color palette offers three light colors to use in place of White: F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.
Mat Size Imprint Area
2.5' x 3' (29" x 34") 20" x 25"
3' x 4' (34" x 45.5") 25" x 36"
3' x 5' (34" x 54.5") 25" x 48"
3' x 10' (34" x 112") 24" x 95"
4' x 6' (45" x 67.5") 36" x 50"
4' x 8' (45" x 95") 36" x 70"
6' x 6' (71.5" x 72") 43" x 50"
6' x 8' (71.5" x 96") 43" x 80"
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch.
SuperScrape Impressions mats can be commercially laundered (see laundering instructions) or cleaned by using detergent with natural pH and rinsing with a hose. Mats should be laid flat or hung to dry.
Always make sure the mat is dry before placing it back in service.
SuperScrape Impressions mats can be commercially laundered periodically to remove soil. The formula below does not require extensive mechanical action or drying, however mats can be dried if necessary.
- Flush 2-3 minutes, medium water level, cold
- Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Drain 2 minutes
- Lay mats flat following removal from washer.
