To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

Plush Mat

Product Number 180
Plush mats feature a thick, plush carpet pile designed to absorb more moisture than standard mats.
  • Superior Moisture & Dust Control - Heavier carpet pile absorbs and retains 50% more moisture and dust than standard mats
  • Resilient - High-twist, heat-set nylon resists crushing to better trap dirt and extend the useful life of the mat
  • Fade Resistant - Solution-dyed nylon won't fade in sunlight or with repeated washing; impervious to bleach
  • Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
  • Commercially launderable
  • Available in 7 color options on durable 90-mil nitrile rubber with smooth, or cleated backing options to ensure the mat stays in place on your floor


Recommended for indoor use at commercial entryways, in lobbies or any interior location where additional traction or moisture control is needed.

2' x 3' (24" x 35")
2.5' x 3' (30" x 35")
2.5' x 4' (30" x 45")
3' x 4' (35" x 45")
3' x 5' (35" x 58")
3' x 10' (35" x 119")
4' x 6' (45" x 68")
4' x 8' (45" x 95")
5' x 8' (58" x 95")
5' x 10' (58" x 119")
5' x 12' (58" x 143")
6' x 10' (68" x 119")
6' x 12' (68" x 143")

Available in custom sizes with widths of 3' (35"), 4' (45"), 5' (58"), and 6' (68") and lengths up to 40'.

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time.  Tolerable manufacturing size variance is 3-5%.

SURFACE
Material: Solution-dyed type 6 nylon
Construction: Cut pile
Weight: 36 ounces/yard2
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2

BACKING OPTIONS
Material: Nitrile rubber (available with smooth or universal cleat)

Thickness: Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)

Overall Mat Thickness: 3/8 inch (0.375")

STANDARDS & TESTING

  • Passes flammability standard DOC FF1-70
  • Certified high-traction by the National Floor Safety Institute (NFSI)

Plush mats can be commercially laundered (see laundering instructions) or cleaned using the instructions below:

  • Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
  • Extract or hose off as needed to remove heavy soil/debris
  • Hang mat to dry

Always make sure the mat is dry before placing it back in service.

Plush mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.  For heavy soil, increase temperature to max 140 degrees F (60 degrees C).  Break should not exceed pH of 9.5; use low pH non-ionic detergents.

  1. Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
  2. Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
  3. Break 2-3 minutes, high water level, 120 degrees F (49 degrees C)
  4. Rinse 2 minutes, high water level, cold
  5. Rinse 2 minutes, high water level, cold
  6. Extract (low speed) 1-2 minutes
  7. Shake out (rotate wheel at wash speed with drain open) 1 minute
  8. Extract (low speed) 3-5 minutes
  9. Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
  10. Cool down 5 minutes
  11. Lay mats flat following removal from washer or dryer. Allow to cool before rolling.

Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C).
If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.